Edimax CAP1300 - XI-2-4 Wlan

336
XI-2-4 Wlan
wlan {2.4g | 5g} 80211n_protect
Set the 802.11n protection.
<The syntax of the command>
wlan 5g 80211n_protect {state}
wlan 2.4g {protect} {state}
- <Parameter>
{protect} 80211n_protect Set the 802.11n protection.
80211g_protect Set the 802.11g protection.
{state} disable Disable the 802.11n or 802.11g protection.
enable Enable the 802.11n or 802.11g protection.
- <Default configuration>
Enable
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 5g 80211n_protect enable
# wlan 2.4g 80211g_protect disable
wlan {2.4g | 5g} basic_info show status
Show the wireless information.
<The syntax of the command>
wlan {media} basic_info show status { advanced | basic | clients | security | wds }
- <Parameter>
{media} 2.4g Show the wireless 802.11g information.
5g Show the wireless 802.11a information.
- <Default configuration>
NA
- <Command mode>
Immediate Mode, Edit Mode, Reference Mode
- <Compatible Products>
CAP1300
- <Examples>
# wlan 2.4g basic_info show status advanced
# wlan 5g basic_info show status security
wlan {2.4g | 5g} beacon dtim
Configure the transmission interval of the DTIM.
<The syntax of the command>
wlan {media} beacon dtim (num)