Edimax CAP1300 - XI-2-2 Lan

325
XI-2-2 LAN
lan ether port {pd ｜ pse} 8023az
Enable or disable 802.3az for wired ports.
<The syntax of the command>
lan ether port {pd｜pse} 8023az {state}
- <Parameter>
pd Set one of wired ports.
pse Set two of wired ports.
{state} disable Disable the ether port of 802.3az.
enable Enable the ether port of 802.3az.
- <Default configuration>
All valid
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# lan ether port pse 8023az disable
lan ether port {pd ｜ pse} link
Enable or disable the wired port.
<The syntax of the command>
lan ether port {pd｜pse} link {disable｜enable}
- <Parameter>
pd Set one of wired ports.
pse Set two of wired ports.
- <Default configuration>
All valid
- <Command mode>
Immediate Mode, Edit Mode
- <Compatible Products>
CAP1300
- <Examples>
# lan ether port pse link disable
lan ether port {pd ｜ pse} speed
Set the wired ports of PHY.
<The syntax of the command>
lan ether port {pd｜pse} speed speed auto flowctl {state}
lan ether port {pd｜pse} speed speed {speed} duplex {duplex} flowctl {state}
lan ether port {pd｜pse} speed speed 1000 duplex full flowctl {state}