Edimax OAP900 - User Manual

OAP900
User Manual
05-2016 / v1.0

Summary

I. Product Information

I-2. System Requirements

Specifies the necessary hardware and software for operation.

I-3. Hardware Overview

Details the physical components and ports of the access point.

I-4. LED Status

Explains the meaning of different LED indicators on the device.

I-5. Reset

Instructions on how to reset the access point to factory default settings.

I-6. Mounting

Guidance on how to physically install the access point on a wall or pole.

I-7. Safety Information

Important safety precautions for using the access point.

II. Quick Setup

II-1. Passive PoE Injector

Steps for connecting the access point using a Passive PoE injector.

II-2. AP Mode

Guide to configuring the access point in standard Access Point mode.

II-3. Managed AP Mode: Edimax Pro NMS

Setup instructions for using the access point as a managed AP with NMS.

II-4. Client Bridge Mode

Configuration steps for using the access point in Client Bridge mode.

IV. Browser Based Configuration Interface

IV-1. Information

Access status, client, network, and log information.

IV-2. Network Settings

Configure IP addresses, LAN ports, and VLAN settings.

IV-3. Wireless Settings

Configure wireless radios, SSIDs, security, and advanced wireless features.

IV-4. Management

Manage device settings, time, logs, and network diagnostics.

IV-5. Advanced

Control LEDs, update firmware, backup/restore settings, and reboot device.

IV-6. Operation Mode

Select and configure the access point's operational mode.

V. Appendix

V-1. Configuring IP Address Across Operating Systems

Detailed steps for configuring IP addresses on Windows XP, Vista, 7, 8, and Mac.

Edimax OAP900 Specifications

General

Brand	Edimax
Model	OAP900
Category	Wireless Access Point
Language	English