EasyManuals Logo

Edimax OAP900 User Manual

Edimax OAP900
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
79
V. Appendix
V-1. Configuring your IP address
The access point uses the default IP address 192.168.2.2. In order to access
the browser based configuration interface, you need to modify the IP address
of your computer to be in the same IP address subnet e.g. 192.168.2.x (x = 3
254).
The procedure for modifying your IP address varies across different operating
systems; please follow the guide appropriate for your operating system.
In the following examples we use the IP address 192.168.2.10 though you can
use any IP address in the range 192.168.2.x (x = 3 254).
If you changed the AP Controller’s IP address, or if your
gateway/router uses a DHCP server, ensure you enter the correct
IP address. Refer to your gateway/router’s settings. Your
computer’s IP address must be in the same subnet as the AP
Controller.
If using a DHCP server on the network, it is advised to use your
DHCP server’s settings to assign the AP Controller a static IP
address.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edimax OAP900 and is the answer not in the manual?

Edimax OAP900 Specifications

General IconGeneral
BrandEdimax
ModelOAP900
CategoryWireless Access Point
LanguageEnglish

Related product manuals