AP, Managed AP, Repeater & Client Bridge Modes
60
VI-3-3-1 Basic
The “Basic” screen displays basic settings for your access point’s 2.4GHz Wi-Fi
network (s).
Enable or disable the access point’s 2.4GHz wireless radio.
When disabled, no 2.4GHz SSIDs will be active.
Wireless standard used for the access point.
Combinations of 802.11b, 802.11g & 802.11n can be selected.
Select how many SSIDs to enable for the 2.4GHz frequency
from the drop down menu. A maximum of 16 can be enabled.
Enter the SSID name for the specified SSID (up to 16). The SSID
can consist of any combination of up to 32 alphanumeric
characters.
Specify a VLAN ID for each SSID.
Enable/disable auto channel selection.
Enable: Auto channel selection will automatically set the
wireless channel for the access point’s 2.4GHz frequency based
on availability and potential interference.
Disable: Select a channel manually as shown in the next table.
To Next Page
Loading...
