AP, Managed AP, Repeater & Client Bridge Modes
38
V Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup is a simple way to establish connections between WPS
compatible devices. You can use the configuration webpage to activate the
device’s WPS function.
1. Go to “Wireless Settings” > “WPS” on your configuration webpage.
2. Check the checkbox of “Enable” and click “Apply” to turn on WPS
function.
3. Within two minutes, activate WPS on your WPS-compatible wireless
device. Please check the documentation of your wireless device for
information regarding its WPS function.
4. The devices will establish a connection.
To Next Page
Loading...
