AP, Managed AP, Repeater & Client Bridge Modes
34
2. Enter the IP address settings you wish to use for your access point. You
can use a dynamic (DHCP) or static IP address, depending on your
network environment. Click “Apply” to save the changes and wait a few
moments for the access point to reload.
When you change your access point’s IP address, you need to use the
new IP address to access the browser based configuration interface
instead of the default IP 192.168.2.2.
Changing SSID for 2.4GHz wireless network
1. Go to “Wireless Settings” > “2.4GHz 11bgn” > “Basic”.
2. Enter the new SSID for your 2.4GHz wireless network in the “SSID1”
field and click “Apply”.
To utilize multiple 2.4GHz SSIDs, open the drop down menu labelled
“Enable SSID number” and select how many SSIDs you require. Then
enter a new SSID in the corresponding numbered fields below, before
clicking “Apply”.
To Next Page
Loading...
