Edimax CAP1750 - IV-2-5. Active Clients

Edimax Pro NMS
117
1. Disallow
Remove the Managed AP from the AP array and disable connectivity.
2. Edit
Edit various settings for the Managed AP (refer to IV-5-1. Access Point)
3. Blink LED
The Managed AP’s LED will flash temporarily to help identify & locate
access points.
4. Buzzer
The Managed AP’s buzzer will sound temporarily to help identify & locate
access points.
5. Network Connectivity
Go to the “Network Connectivity” panel to perform a ping or traceroute.
6. Restart
Restarts the Managed AP.
IV-2-5. Active Clients
Active Clients displays information about each client in the local network:
Index (reference number), Client MAC Address, AP MAC Address, WLAN, User
Name, Radio (frequency), Signal Strength, Connected Time, Idle Time, Tx & Rx
(data transmitted and received) and Vendor of the client device.
The search function can be used to locate a specific client. Type in the search
box and the list will update: