67
IV-3-6-2. Internal Server
The access point features a built-in RADIUS
server which can be configured as shown
below used when “Internal” is selected for “RADIUS Type” in the “Wireless
Settings” “RADIUS” “RADIUS Settings” menu.
To use RADIUS servers, go to “Wireless Settings”
“Security” and
select “MAC RADIUS Authentication”
“Additional
Authentication” and select “MAC RADIUS Authentication” (see
IV-3-1-3. & IV-3-2-3).
Check/uncheck to enable/disable the access
point’s internal RADIUS server.
EAP Internal
Authentication
Select EAP internal authentication type from
the drop down menu.
EAP Certificate File
Format
Displays the EAP certificate file format:
PCK#12(*.pfx/*.p12)
Click “Upload” to open a new window and
select the location of an EAP certificate file to
use. If no certificate file is uploaded, the
internal RADIUS server will use a self-made
certificate.
Enter a shared secret/password for use
between the internal RADIUS server and
RADIUS client. The shared secret should be 1 –
To Next Page
Loading...
