35
IV-2. Network Settings
Screenshots displayed are examples. The information shown on
your screen will vary depending on your configuration.
IV-2-1. LAN-Side IP Address
The “LAN-side IP address” page allows you to
configure your access point on your Local Area
Network (LAN). You can enable the access point to dynamically receive an IP
address from your router’s DHCP server or you can specify a static IP address
for your access point, as well as configure DNS servers.
The access point’s default IP address is 192.168.2.2.
Select “DHCP Client” for your access point to
be assigned a dynamic IP address from your
router’s DHCP server, or select “Static IP” to
manually specify a static/fixed IP address for
your access point (below).
Specify the IP address here. This IP address
will be assigned to your access point and will
replace the default IP address.
Specify a subnet mask. The default value is
255.255.255.0
To Next Page
Loading...
Need help?
General
