Edimax CAP1200 - IV-4-6. Operation Mode

AP Mode
78
IV-4-6. Operation Mode
The access point can function in three different
modes. Set the operation mode of the access
point here. AP mode is a standalone access point, AP controller mode acts as
the designated master of the AP array, and Managed AP mode acts as a slave
AP within the AP array. Refer back to Overview and Edimax Pro NMS I.
Product Information for more help.
In Managed AP mode some functions of the access point will be
disabled in this user interface and must be set using Edimax Pro
NMS on the AP Controller.
In AP Controller Mode the access point will switch to the Edimax
Pro NMS user interface.
Operation Mode
AP Mode is a standard access point in a
wireless network.
AP Controller Mode is the master of an AP
array and controls all other managed APs
(below) using Edimax Pro NMS.
Managed AP mode is an AP which is part of
the AP array and is managed by the
Controller AP.