Edimax CAP1200 - IV-4-2. Date and Time

AP Mode
73
IV-4-2. Date and Time
You can configure the time zone settings of your
access point here. The date and time of the
device can be configured manually or can be synchronized with a time server.
Date and Time Settings
Local Time
Set the access point’s date and time manually
using the drop down menus.
Acquire Current
Time from your PC
Click “Acquire Current Time from Your PC” to
enter the required values automatically
according to your computer’s current time and
date.
NTP Time Server
Use NTP
The access point also supports NTP (Network
Time Protocol) for automatic time and date
setup.