6
8. You now have the option
of selecting which mode
you want to use.
Access Point Mode
1. Select Access Point Mode and click “Next”.
2. You will be prompted to set the
SSID of this access point. The
SSID will be the name of the
access point when you connect
to it wirelessly. The default SSID
is Edimax AP. This page also
offers the option to change the
password used to access the
device’s configuration settings.
For first time setup, please simply click “Next” without changing anything.
3. You will now be prompted to
set up a wireless encryption
password. You have the option
of using no security encryption,
or selecting the WEP or WPA
pre-shared key encryption
schemes. It is recommended
that you set up an encryption
method, though, for security
reasons.
To Next Page
Loading...
Need help?
General
