EasyManuals Logo

Edimax EW-7811UN Manual

Edimax EW-7811UN
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
If the computer can't detect the wireless adapter
Make sure the adapter is plugged in correctly.
Make sure the computer meets the system requirement and install the latest driver. You can
download the driver at http://www.edimax.com
Try to connect the wireless adapter with a different port on the computer
Try to restart the computer.
Update the USB drivers. (Check motherboard/logic board manufacturer or computer manufacturer
website for latest drivers)
Test the adapter on a different computer to verify whether it is working or faulty.
How to check my wireless adapter is installed properly
Windows 7 - Go to Start > Computer [Right Click] > Properties > Device Manager.
Windows 8.1/10 - Press the Windows key and X together and then click Device Manager.
Click the Network Adapters.
Right-click on Edimax …… Adapter and select properties to check that the drivers are installed
properly.
When you see “This device is working properly.” in the windows, you have already installed the
driver successfully.
How to fix the issue that my Adapter can't work
Check if your wireless password is correct.
Try to uninstall the driver and install the driver again.
Use automatic troubleshooting. Right-click on the network icon in your system tray and select
"Troubleshoot Problems" to run the Windows Network Diagnostic routine. This can sometimes
correct common issues.
Try to reboot your PC.
The wireless adapter LED does not light up.
Remove and re-insert the wireless adapter.
Check the Windows device manager to see whether the wireless adapter is enabled and recognized.
Re-install the driver and try it again.
Insert the wireless adapter in a different USB port on your computer.
What should I do if I cant join a wireless network
Make sure the adapter is connected with the computers USB port properly.
Check if you have installed the driver for your adapter successfully. You can download the latest
driver at http://www.edimax.com
Re-install the driver and try again.
Check the LED indicators on the wireless router or access point are functioning properly. If not,
check that the AC power adapter and Ethernet cables are firmly connected.

Other manuals for Edimax EW-7811UN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edimax EW-7811UN and is the answer not in the manual?

Edimax EW-7811UN Specifications

General IconGeneral
Wi-FiYes
Wi-Fi bandSingle-band (2.4 GHz)
Ethernet LANNo
Frequency range2.4 - 2.4835 GHz
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Security algorithms128-bit WEP, 64-bit WEP, WPA2
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate150 Mbit/s
WLAN data transfer rates supported1, 2, 6, 9, 11, 12, 24, 36, 48, 54, 72, 150 Mbit/s
InterfaceWLAN
Connectivity technologyWireless
Chipset-
CertificationCE, FCC, WiFi
Product colorBlack, Gold
LED indicatorsActivity, Link
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth7.1 mm
Width14.9 mm
Height18.5 mm

Related product manuals