Do you have a question about the Edimax GS-5008PL and is the answer not in the manual?
Switch type | - |
---|---|
Quality of Service (QoS) support | Yes |
Certification | FCC Class A, CE |
Product color | Black |
LED indicators | Activity, Link, Power |
Jumbo frames | 9600 |
Forwarding rate | 11.9 Mpps |
MAC address table | 4000 entries |
Packet forwarding rate (1 Gbps) | 1488000 pps |
Packet forwarding rate (10 Mbps) | 14880 pps |
Packet forwarding rate (100 Mbps) | 148800 pps |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Total Power over Ethernet (PoE) budget | 130 W |
Power over Ethernet (PoE) power per port | 30 W |
10G support | No |
Number of VLANs | 8 |
Networking standards | IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3p, IEEE 802.3u, IEEE 802.3x |
Virtual LAN features | VLAN Identifier ( VLAN ID), Tagged VLAN, Port-based VLAN |
Number of multicast groups filtered | 20 |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 10 - 90 % |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Depth | 184 mm |
---|---|
Width | 265 mm |
Height | 44 mm |
Weight | 1620 g |
Details of the switch's features: Gigabit ports, PoE support, VLAN, QoS, ACL, IGMP Snooping, and MAC table.
Steps to access the switch's web management interface using default IP and credentials.
View device information and configure device name and IPv4 address.
Configure IEEE 802.1Q and Port-Based VLANs for network segmentation.
Configure port-based and 802.1p QoS for traffic prioritization.
Manage PoE global settings, including total power budget and port status.