Edision HDMI Modulator - User Manual

CONFIG FILE DOWNLOAD TO USB STICK
► Step 1
Ιnsert the USB-stick to the USB port on the HDMI MODULATOR
and press the MENU /OK button.
► Step 2
Press button 3 twice (2 times), until
save to usb
press key up
appears on screen.
► Step 3
Press button 5 and
save to usb
success!
appears on screen
► Step 4
Screen returns to initial display mode and the «config» file is saved to the USB-stick
plugged in the USB port of the HDMI MODULATOR
HDMI Modulator single DVB-T
Instruction Manual for CONFIG
1

Summary

Config File Download to USB Stick

Insert USB Stick

Insert the USB-stick to the USB port and press the MENU /OK button.

Navigate to Save Option

Press button twice until 'save to usb press key up' appears.

Initiate Save Operation

Press button and confirm 'save to usb success!' message.

Save Confirmation and Completion

Screen returns to initial mode; config file is saved to USB.

Config File Editing

Connect USB Stick to PC

Insert the USB-stick with the CONFIG file for editing to a USB port of a PC.

Open Configuration File

Open the jedi_config.txt file using Windows Wordpad.

Edit Configuration Parameters

Edit parameters according to requirements and save changes.

Parameter Configuration Details

Details on configuring parameters and unique values for multiple modulators.

Config File Upload to Modulator

Disconnect Power Supply

Remove the mains power supply plug before proceeding.

Connect USB and Reconnect Power

Connect USB stick, then re-connect the mains power supply.

Select Upload Option

Select 'Yes' to 'cfg from usb' and press MENU/OK to initiate loading.

Upload Confirmation and Reboot

Modulator re-boots with the new config file.

Edision HDMI Modulator Specifications

General

Input	HDMI
Standard	DVB-T
Output	RF
Bandwidth	8 MHz
Resolution	1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Power Consumption	≤5W
Operating Temperature	0°C to +40°C
Weight	0.2 kg
MER	>35dB (typ.)