Need help?Do you have a question about the Edision HDMI Modulator single DVB-T and is the answer not in the manual?
Details RF output and input terminals for signal mixing and input.
Covers the LTE filtering switch, USB 2.0 port, and HDMI input.
Specifies the DC 5V/2A (or 12V) power input connection.
Describes the LOCK, MENU/OK, and navigation buttons.
Details the POWER, LOCK, and SIGNAL LEDs.
Instructions for setting up output channel, name, and other parameters.
Details setup for Constellation, FEC, FFT, Guard Interval, RF Level, and Audio Format.
Guide to LCN, Network Name, PIDs, and Video Bit Rate setup.
Covers turning off the OLED display and resetting to factory defaults.
Instructions for saving configuration to USB and upgrading device software.
Details on Processor, Memory, Video, and Audio encoding.
Covers output frequency, impedance, FEC, guard interval, constellations, and RF level.
Specifications for RF input/output, USB, HDMI, and power connectors.
Details on the OLED display, LEDs, and control buttons.
Information on power adapter, consumption, dimensions, and construction.
General| Input Interface | HDMI |
|---|---|
| Output Interface | RF (DVB-T) |
| Video Resolution | Up to 1080p |
| Power Supply | 12V DC |
| Bandwidth | 6/7/8 MHz |
| Standard | DVB-T |
| FFT Mode | 2K, 8K |
| Guard Interval | 1/4, 1/8, 1/16, 1/32 |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| Constellation | QPSK, 16QAM, 64QAM |
| Modulation Type | COFDM |
| Audio Format | MPEG1 Layer II |
| MER | ≥35dB |
| Frequency Range | 470~862MHz (UHF) |
| Video Encoding | H.264 |
| Audio Encoding | MPEG1 Layer II |
| HDMI Input Resolution | 480i/576i/480p/576p/720p/1080i/1080p |
| Power Consumption | <3W |
| Weight | 200g |
To Next Page
