Edision HDMI Modulator single DVB-T - Software Upgrade and Data Backup

8
4.1.7 Save configuration to USB.
Press”MENU/OK”buttontoentersetupmenu.Use“ “(Left)or“ “(Right)
button to select “Save to usb” option. Press “ “(UP) button” to start saving
process and then the display will appear “Success!” when the procedure is
completed.
4.1.7 How to upgrade software
1:Copythe“jedi.img”filetotheUSBdevice.
2: POWER OFF the modulator.
3:PlugtheusbdeviceintoUSBportonthebackofthedevice.
4:POWERONthemodulator.
5:WhenontheOLEDdisplayappears“UpgradeYes(*)No()”,press“MENU/OK”
button to start upgrade process.
Upgradeprocedurewillfinishafter10secondsapproximately.
WARNING!  DO NOT poweroff themodulator while upgrading!!Damage tothe
devicemayoccur!
Ifyoudonotwanttoupgradesoftware,press“ “(DOWN)buttontoselect“No
(*)”andthenpress“MENU/OK”buttontoendupgradesubmenu.