Edision HDMI Modulator single DVB-T - Channel and Network Settings; System Management Functions

7
4.1.4 LCN Setup, Network Name, Audio pid, Video pid, Pmt pid, Program
num. Video Bit rate.
Press“MENU/OK”button.Toselectthedesiredoptionpress“ “(Left)or
“ “(Right).Forexample, editLCN:Press “ “(UP) button.thenleft sidefirst
character flickering. To change the number, use “  “(Left) or “ “(Right)
button.Toselectnextnumbertobeedited,press“ “(DOWN)button.Toend
editing,press“ “(UP)button.Toeditanotheritem,press“ “(Left)or“
“(Right)button.Press“MENU/OK”buttontwo[2]timestosaveconfiguration.
4.1.5 Turn off OLED display
Press”MENU/OK”buttontoentersetup.Use“ “(Left)or“ “(Right)button
toselect“Ledoff?”option.Press“ “(UP)button”toturnofftheoleddisplay.
Press“MENU/OK”buttonagaintoactivatetheoleddisplayagain.
4.1.6 Reset to Factory default values
Press”MENU/OK”buttontoentersetup.Use“ “(Left)or“ “(Right)button
toselect“Factoryreset“todefaultvalues.Press“ “(UP)button”tostartreset
tofactorydefaultvalues.Thedisplaywillappear“Success!”whentheprocedure
is completed.