Congratulations on purchasing an EDISΙON picco T265+
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
1
HDMI in
2
HD m i
kabel
HDMI
kabel
Receiver picco T265+
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
/ USB: Connection for USB storage devices
2
Display LED, displays current information
3
Infrared sensor for the reception of remote control commands
4
CH- / CH+ buttons: for moving in the program lists
5
POWER button: Activates/Deactivates the device
Back Panel
6
ANT IN: Input for connecting to terrestrial or cable signal
from the antenna
7
S/PDIF: Audio interface for amplier/audio console
8
HD OUT: Connection to an HDTV quality TV
9
SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
10
Connection for an adapter (DC 5V)
Subpages
11
IR IN: Infrared connection port
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated and
inspected by a qualied professional with a digital
TV-level-measuring instrument.
•
Connect the receiver using HDMI cable via the
HD OUT output port to your TV’s HDMI input port
•
Then connect the coaxial cable from the terrestrial
antenna to the ANT IN input of the receiver.
•
Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
•
Connect the receiver to the power supply.
•
The receiver starts with the BOOT process and
is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HD OUT:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
ANT IN:
coaxial-wire
input from terrestrial /
cable signal
picco T265
+
Digital Terrestrial & Cable Receiver DVB-T2/C H.265/HEVC
88 mm
126 mm
30 mm
coaxial-wire Antenna
1
2
3 4
5
6
7
8
9
10
IR
11
After the rst start,
choose your language
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
Support
USB
For information about EDISION Hardware or Software matters, please contact support@edision.gr
To Next Page
Need help?
General
