Need help?Do you have a question about the Edision PICCOLLO S2+T2/C and is the answer not in the manual?
Connect the ethernet cable to the internet router.
Signal output of the receiver.
Configure network settings via System > Ethernet Setting menu, ensuring DHCP is ON.
Connect to the PAOK TV application via remote control or menu navigation.
Access System > Software Upgrade via the MENU to check for and install updates.
Download and unzip the update file to a USB stick's root directory and select 'Start'.
Connect to the internet, select the update file, press RED button, then 'All SW + bootloader'.
General| HDTV Compatible | Yes |
|---|---|
| USB | Yes |
| DiSEqC | 1.0, 1.1, 1.2, USALS |
| USB Ports | 1 |
| RAM | 512 MB |
| Operating System | Linux |
| Tuner Type | DVB-S2, DVB-T2 |
| Video Output | HDMI |
| Audio Output | HDMI, RCA |
| Resolution | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Connectivity | HDMI, USB, Ethernet |
| Power Supply | 12V |
| Type | Digital Receiver |
| Video Decoding | MPEG-2, MPEG-4 |
| Audio Decoder | MPEG |
To Next Page
