Glass Thickness Meter and Low-E Coating Detector
Glass-Chek
Model # GC3000
Operating Manual
Glass-Chek PRO - GC3000
Contents
The Glass-Chek PRO enables you to measure glass and air space
thickness of triple pane windows from a single side (also compatible with
double and single pane). Furthermore, the GC3000 allows you to
determine the presence, location and type of invisible low-E coatings.
This manual will outline how to use the meter, including choosing language
and measurement settings, explanations of “results” screens, proper use,
and maintenance of the meter. Additionally, it will outline appropriate
applications, technical details and warranty information.
Page 1 .................................................... Using Setup Mode
Page 2 .................................................... Choose Your Language in Setup Mode
• Choose Normal, Hi Res or Low-E Laminate
• Choose Display Units
Page 3 .................................................... Proper Operation of the Glass-Chek PRO
• Turning the meter off
• Proper Hand Placement
Page 4 .................................................... Explanation of Measurement Displays
Page 5 .................................................... Explanation of Error Messages
Page 6 .................................................... Troubleshooting Guide
Page 7 .................................................... Application Details
• Compatible Applications
• Low-E Detection Capabilities
Page 8 .................................................... Application Details
• Glass-Chek Pro Specifications
• Glass Thickness Range
• Laminated glass (continued on Page 9)
Page 9 .................................................... Glass-Chek PRO Specifications
• Laminated Glass with Low-E against the PVB
• GC3000 Standards Table
• Warranty Details
PRO
EDTM GC3000 Glass-Chek Pro Thickness Meter
To Next Page
Need help?
General
