1. Prepare the Flush kit / Solenoid valve for ins
tallaon.
A. Flush kit / Solenoid valve
B. Aach the br
acket to the Flush kit / Solenoid valve with the hex head cap
screw
C. Flush kit / Solenoid valve with bracket
Note:
Do not fully gh
ten the hex head cap screw, so that the bracket posion can
be adjusted.
2. Replace the plug screw with the adapter.
▪ Replace the plug screw adjacent to the pump inlet with the supplied adapter.
1. Plug screw
2. Adapter
05/2021 - ©Edwards Limited
Page 10A41892880_C
A41892880_C - Ins
tallaon
To Next Page
Loading...
