2
Plug in (optional)
If you want to stream via the internet,
go straight to step 2.
If you have an aerial, plug it into the
blue aerial socket and your HDMI®
cable into the purple socket
(see page 4).
Depending on your TV, you might need
to use a specific HDMI port for Ultra
HD and HDR.
To get the best possible picture quality,
make sure you use the HDMI cable we
sent you.
Visit ee.co.uk/help for
more information.
GETTING STArTED
Choose how you want
to connect
You can connect your TV Box to your
Smart Hub using either WiFi or ethernet.
A: Connecting by WiFi?
The range of the TV Box can vary
significantly depending on location,
obstructions and interference.
Place your TV Box no more than one
wall, ceiling or floor away from your
Hub or Smart WiFi device and limit the
amount of electrical equipment and
other WiFi devices close to your TV Box.
For optimum WiFi performance the TV
Box should be set up within 5 metres line
of sight of your hub or Smart WiFi.
Go to step 3.
B: Connecting by Ethernet cable?
Connect your hub to your TV Box
(yellow socket) using the ethernet
cable we sent you (see page 4).
Set up your remote
Activate the batteries by removing
the protector strip and press the
power button. The remote control will
automatically pair with the TV Box and
programme itself to control your TV
as well.
Follow the on
screen instructions
Simply follow the on screen
instructions which will guide you
through the set up process and
introduce you to your EE TV service.
Important: before you set up your TV Box, make sure your broadband is up and running.
Power up
Plug your TV Box into the nearest
socket on the wall.
Press the power button on the
front of your TV Box to turn it on.
Important: use the power
supply unit provided in your
TV Box pack.
3
1 2 3 4 5
To Next Page
Loading...