13
EGS Series Quick Start User Manual
Version 01 - 2020
The EGS Series provides full motor overload protection, configurable through the user interface. Overload trip
settings are determined by the Motor Current setting and the Trip Class setting. Trip class choices are Class 10,
Class 20, and Class 30. The EGS Series soft starters are protected using full I
2
T motor overload with memory.
Please note: When the overload has tripped, there is a forced cooling time to allow the overload to recover
before the next start.
The ‘warm’ trip times are 50% of the ‘cold’ trip time
Motor Overload
To Next Page