eeese Nora 2525 - Page 78

78
MV-2525-11-2021
.
eeese-aircare.com © All rights reserved by weese air care a/s
UK
Air blower function
Press B until the "FAN" light is on in order to switch to the air blower function and choose
between low blow speed and high blowing speed by pressing A.
Dehumidier function
Press A until you can see that the light for "DRY" is on in order to initiate the
dehumidier function.
Sleep mode function
By choosing sleep mode the unit switches to low fan speed.
Airow spreader
Press this function to achieve an even distribution of airow in the room.
The dehumidier stops if the room is too cold, but restarts when the temperature
goes above 17 °C.
Remote control
When the unit is switched on with the remote control (A), the cooling function is switched
on automatically. The blowing speed can be changed between low and high blowing
speed by pressing B. Press E to switch between the cooling, blowing and cooling func-
tions. The timer is activated by pressing D, and the arrow buttons (C) set the number of
hours for the device to be automatically switched o. The timer is reset and stopped by
pressing D twice. By choosing sleep mode (F) the unit switches to low fan speed. Press G
to achieve an even distribution of airow in the room.
A B
A
13 14 15 16 17 18 19 21
20 21A
13 14 15 16 17 18 19 21
20 21A
A B C D E F G