EemaX HA008240 Installation Manual

Electrical Connection
The electrical installation is based on the different Models. Unit must be installed
to independent double pole breakers as per Model Specs below
MODEL
REQUIRED
BREAKER
MAX AMP
DRAW
AWG Cable
HA008240
1 x40AMP*
33
#8
HA011240
1 x50AMP*
46
#6
HA013240
1 x60AMP*
54
#6
Check all wires to make sure they are securely fastened and tightened. Before
turning the power on make sure the system has been purged as required in the
plumbing section. When the unit is powered up the GREEN LED indicator light will
turn ON and then OFF.
*Double Pole

EemaX HA008240 Specifications

General

Brand	EemaX
Model	HA008240
Category	Water Heater
Language	English