What to do if my EemaX LavAdvantage SPEX4208T Water Heater shows undervoltage?
If your EemaX Water Heater indicates undervoltage, it means the inlet voltage is too low compared to the heater's specifications. Have certified personnel check the inlet voltage and ensure it's within the specified range.
What to do if my EemaX LavAdvantage SPEX4208T has high flow?
If your EemaX Water Heater experiences high flow, the flow rate might be too high to heat the water to the setpoint temperature. Reduce the flow by using an outlet flow restrictor or a faucet aerator.
What to do if my EemaX Water Heater shows a freeze warning?
If your EemaX Water Heater displays a freeze warning, the inlet water temperature is too low (below 35°F). Increase the inlet water temperature above 35°F to resolve this.
General| Brand | EemaX |
|---|---|
| Model | LavAdvantage SPEX4208T |
| Category | Water Heater |
| Language | English |
Explains how to interact with the unit's control buttons and interface for adjustments.
Details the process of increasing or decreasing the water temperature setpoint.
Accessing and cycling through advanced parameters like flow rate and inlet temperature.
To Next Page
