EasyManua.ls Logo

EemaX EMT4 - User Manual

EemaX EMT4
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Electric Mini Tank Water Heaters
EMT2.5 & EMT4
Installation and Operating Instruction Manual
Eemax mini tank manual.indd 1 5/30/2008 10:44:49 AM

Table of Contents

Questions and Answers

  • A
    Amy IngramAug 15, 2025
    How to fix EemaX EMT4 when water does not get hot?
    • J
      Julie WatsonAug 15, 2025
      If your EemaX Water Heater isn't heating water, first ensure the power supply is on and working. If the indicator light isn't on, try pushing the reset button. If the light is on but the water isn't hot, test for a plumbing crossover by shutting off the cold water supply and opening the hot water tap; continuous flow indicates a crossover issue. If there's no crossover, the heating element may need replacement.
  • M
    Micheal ReedAug 18, 2025
    How to adjust temperature on EemaX EMT4 Water Heater when water is too hot?
    • A
      Austin WhitakerAug 18, 2025
      If the water from your EemaX Water Heater is too hot, turn the temperature knob counterclockwise to a lower setting. If the temperature doesn't decrease within 60 minutes, the thermostat may need to be replaced.
  • N
    nathaniel66Aug 22, 2025
    Why EemaX EMT4 Water Heater water does not get hot?
    • M
      mark42Aug 22, 2025
      If your EemaX Water Heater isn't heating water, first ensure the power supply is on and working. If the indicator light doesn't illuminate, check that the reset button is pushed in. If the light is on but the water isn't hot, test for a plumbing crossover by shutting off the cold water supply and opening the hot water tap; continuous flow indicates a crossover issue. If there's no crossover, consider replacing the heating element.
  • A
    anitahumphreyAug 25, 2025
    Why EemaX EMT4 Water Heater water is too hot?
    • J
      Jamie GrahamAug 26, 2025
      If the water from your EemaX Water Heater is too hot, try turning the temperature knob counter-clockwise to a lower setting. Allow up to 60 minutes for the temperature to adjust. If the temperature remains high, you may need to replace the thermostat.
  • L
    Lisa GutierrezAug 28, 2025
    What to do if EemaX Water Heater is leaking?
    • C
      Christopher SalazarAug 29, 2025
      If your EemaX Water Heater is leaking, immediately turn off the power and unplug the unit. Check the water fittings and the T&P fitting on top of the tank. Then, remove the cover and inspect the heating element gasket.
  • P
    pamela48Aug 31, 2025
    Why does my EemaX EMT4 Water Heater have odor in water?
    • C
      Carla ShepherdAug 31, 2025
      Smelly water from your EemaX Water Heater could be due to a reaction between your local water and the heater's anode rod. Check the anode rod.
  • R
    Robert ClaySep 3, 2025
    What to do if EemaX EMT4 Water Heater has brown water?
    • M
      Michael McdowellSep 4, 2025
      Brown or rusty water from your EemaX Water Heater indicates a 'spent' anode rod. Replace the anode rod.
  • L
    Levi WrightSep 7, 2025
    Why EemaX EMT4 Water Heater has odor in water?
    • E
      Elizabeth HoustonSep 7, 2025
      Smelly water from your EemaX Water Heater could be due to a reaction between your local water and the heater's anode rod. You should check the anode rod.
  • J
    joangarciaSep 12, 2025
    Why EemaX Water Heater has brown water?
    • C
      caitlynhallSep 12, 2025
      Brown or rusty water from your EemaX Water Heater usually means the anode rod is spent. Replace the anode rod.

Summary

Important Safety Instructions

Technical Data

Dimensions

Schematic Construction

Illustrates the internal layout and components of the water heater, showing parts like the tank, heating element, and thermostat.

Wiring Diagram

Depicts the electrical circuit and connection points for the water heater, including power, thermostat, and safety limit switch.

General Information

Technical Description

Installation Instructions

Choose a Location

Guidance on selecting an optimal and accessible installation site for the water heater, considering maintenance access.

Wall Mounting

Instructions on how to securely mount the water heater to a wall, including bracket use and ensuring vertical position.

Plumbing Connections

Temperature and Pressure Relief Valve

Instructions for installing the T/P relief valve and its safety discharge pipe, emphasizing proper orientation and unobstructed flow.

Closed System Thermal Expansion

Filling the Water Heater

Electrical Connections

Instructions for Use

Setting the Thermostat

How to adjust the water temperature using the thermostat knob and understanding the indicator lamp.

Setting the Freeze Protection

Measures to protect the water heater from freezing during extended periods of non-use, such as draining or using freeze protection.

Maintenance Instructions

Draining and Removing the Water Heater

Step-by-step guide on how to safely drain and detach the water heater for maintenance or replacement.

Removing the Heating Element

Procedure for accessing and removing the water heater's heating element for inspection or replacement.

Descaling the Heating Element

Replacing the Heating Element

Changing the Thermostat

Resetting the High Limit Switch

Trouble Shooting

Water does not get hot

Troubleshooting steps for when the water heater fails to heat water, including checking power and potential crossovers.

Indicator light not on

Steps to diagnose why the indicator light is not functioning, even if the water is heating.

Brown water

Explanation that brown or rusty water may indicate a spent anode rod that needs replacement.

Odor in water

Possible causes for smelly water, including reactions with the anode rod, and checking the anode rod.

Water is too hot

Troubleshooting for excessively hot water, suggesting thermostat adjustment or replacement.

Water is not hot enough

Guidance on addressing water that is not hot enough, referencing thermostat settings.

Water is leaking

Steps to identify and resolve water leaks, checking fittings and the heating element gasket.

Schematic Disassembly

Parts List EMT2.5 & EMT4

Warranty

How the Owner Can Secure Service Assistance or Make a Warranty Claim

EemaX EMT4 Specifications

General IconGeneral
BrandEemaX
ModelEMT4
CategoryWater Heater
LanguageEnglish

Related product manuals