14 / 24 SHIELD-SET-MANUAL-EN-Rev.02
3. Look back over shoulder → Select “Hold Time” in APP
4. Controller notifies you successful triggering with a beep →
Enable” Beep notification” in APP
5. Check if you can trigger turn signals of both sides with the
settings
Cancel Turn signal
You can cancel turn signal by lowering your head within 6
seconds after triggering turn signal. Controller notifies you
successful canceling with beeps.
Practice the action before using SHIELD for your ride
Sensing Brake
Deceleration triggers brake light. The sensitive level can be
configured in Eesens APP → select” Brake Sensitivity” in APP
Anti-theft Alarm
SHIELD’s alarm system works by detecting vibration and
movement
on the device. You can turn on the alarm manually in APP.
The tail light can also switch on itself, if Auto-armed setting is
ON in APP.
If the armed tail light is moved, alarm will be triggered.
Meanwhile, the tail light alerts to linked controller/APP to
notify owner to check bike. The alarm stops, 10 seconds after
the movement stops.
To Next Page
Loading...