Need help?Do you have a question about the eesens SHIELD and is the answer not in the manual?
General| Brand | eesens |
|---|---|
| Model | SHIELD |
| Category | Bicycle Accessories |
| Language | English |
Details the components and features of the SHIELD tail light, including LEDs, signals, and USB port.
Outlines the components and features of the EESENS sensing controller, including its status LED, buzzer, and USB port.
Instructions for initial activation and charging of the SHIELD device using a USB-C cable and adapter.
Steps to download the EESENS app, activate Bluetooth, and connect the SHIELD device to a smartphone.
Guide on attaching the SHIELD tail light to a bicycle seat post using provided fixtures and screws.
Instructions for mounting the sensing controller onto a helmet using zip ties or silicone rings for optimal sensor reading.
Explains controlling the SHIELD via its touch button, device feedback (LEDs, beeps), and the Eesens app.
Details specific functions triggered by single taps and prolonged presses on the Tail Light and Sensing Controller.
Covers motion detection for auto on/off, turn signal activation via head gestures, sensing brake light, and anti-theft alarm.
Describes configuring device settings via the Eesens app and updating the device firmware for new features or fixes.
Explains different operational modes like Security, Carry, and PowerSave for the tail light.
Addresses common problems such as the device not powering on or not charging correctly.
Provides solutions for the tail light not working, making noise, or the device functioning abnormally.
Guides on resolving problems with pairing or connecting the SHIELD device to the Eesens application.
To Next Page