eesens SHIELD - Mounting the Tail Light

8 / 24 SHIELD-SET-MANUAL-EN-Rev.02
(You can read our privacy policy at
https://www.eesens.com)
3. Follow instructions in app to connect to your SHIELD
device.
4. Once connected, you can control your SHIELD and
configure the settings.
3. Install Tail Light to Seat post
1. Adjust the fitting with the Silicone Band by inserting it
inside the Seat Post Fixture.
2. Attach the Fixture to seat post, secure it use the Big
Screw.
3. Attach the Tail Light Mount to the fixture, with 4 Small
Screws.
4. Slide the Tail Light into the mount until you hear a click.