17 / 24 SHIELD-SET-MANUAL-EN-Rev.02
Functional Modes of Tail Light
SHIELD Tail Light has other functional modes, which stop ride
lights. You need to switch back to ride mode before riding
bike.
Security mode
Turn on the anti-theft alarm manually or by device
automatically for securing your bike. Moving tail light trigger
alarms. Turn off the mode by APP or by entering tapcode on
tail light. You can set a tapcode in APP. Using tapcode on tail
light as following steps:
1. Tap twice on the touch of the armed tail light
2. After 2 yellow LED flashes, start entering your tapcode
3. Green LED flashes means the tail light is disarmed. Red
LED flashes means your tapcode is wrong.
Carry mode
Turn off all functions related to ride lights and alarm. Entering
this mode with touch command, for transportation. Exiting
with charging, rebooting and touch command.
PowerSave mode
With low battery level, SHIELD device enables PowerSave
mode to extend the use time for riding safely at night. Some
functions, such as Day Flash, with high power consumption
To Next Page
Loading...