16 / 24 SHIELD-SET-MANUAL-EN-Rev.02
Sensing Controller
Turning
angle &
hold time
customize turning head pattern for triggering
turn signals. The setting has three presetting
schemes
Controller beeps when a gesture is triggered
LED flashes when controller works
Firmware Update
Update devices to the latest firmware for new features or
fixes. The update button will appear if Eesens APP detects
newer firmware is available for your device. Tapping on the
button starts updating. Don’t interrupt the updating process
by quitting the App, turning off Bluetooth/phone or rebooting
devices. This may cause the devices failure. We recommend
strongly you to charge SHIELD to high battery level and to
follow the instructions in Eesens APP before update.
Some functions may be changed with the new software.
Read the release notes in Eesens’ website to know the
changes.
To Next Page
Loading...