EFA band saws Operating instructions EN
9.2 Repair by customer service
Repairs are only allowed to be
carried out by qualified and
instructed personnel.
Only use genuine spare
parts.
Voltage!
Disconnect the band saw from
the mains prior to performing any
repair work.
The EFA Service department of Schmid & Wezel GmbH is at your disposal for repairs.
If your equipment needs to be repaired, please contact the nearest authorised service centre or our head
office.
After repairs, the fill-for-life lubrication of the gear units must be restored each time!
In the event of malfunctions that cannot be clearly localised, the device should be returned to S&W for
repair.
9.2.1 Return
Return your waste electrical
equipment to our head office.
Schmid & Wezel GmbH
Maschinenfabrik
Maybachstrasse 2
75433 Maulbronn / Germany
+49 7043 / 1020
+49 7043 / 10278
＠ efa-verkauf@efa-germany.de
Internet: http://www.efa-germany.de
To Next Page
Loading...
