EFA SB 287 E - Table of Contents

EFA band saws Operating instructions EN
Rev.02 – 03.2021
1 of 28
Table of contents
1 Introduction and general information ______________________________________________________ 2
1.1 Information on the operating instructions ______________________________________________________ 2
1.2 User group _____________________________________________________________________________ 2
1.3 Scope of supply __________________________________________________________________________ 3
1.4 Intended use ____________________________________________________________________________ 3
1.5 Claims for defects, liability, warranty __________________________________________________________ 4
2 Safety ______________________________________________________________________________ 6
2.1 Safety instructions ________________________________________________________________________ 6
2.1.1 Other safety signs __________________________________________________________________ 7
2.1.2 Warning signs _____________________________________________________________________ 7
2.1.3 Mandatory instruction signs ___________________________________________________________ 7
2.1.4 Prohibition sign ____________________________________________________________________ 8
2.2 Personal protective equipment ______________________________________________________________ 8
2.3 Conduct at the workplace __________________________________________________________________ 8
3 Technical description __________________________________________________________________ 9
3.1 Dimensions ____________________________________________________________________________ 12
3.2 Nameplate _____________________________________________________________________________ 14
4 Transport and storage ________________________________________________________________ 15
5 Connection and start-up ______________________________________________________________ 16
5.1 Initial start-up ___________________________________________________________________________ 16
5.1.1 Spring balancer ___________________________________________________________________ 16
5.1.2 Adjustment of the suspension (EFA SB 327 E) ___________________________________________ 17
5.1.3 Electrical connection _______________________________________________________________ 17
5.1.4 Water connection _________________________________________________________________ 17
6 Handling ___________________________________________________________________________ 18
6.1 Switch operation ________________________________________________________________________ 18
6.1.1 Switching on _____________________________________________________________________ 18
6.1.2 Switching off _____________________________________________________________________ 19
6.2 Working with the band saw ________________________________________________________________ 19
6.2.1 Operation________________________________________________________________________ 19
6.2.2 Operational safety _________________________________________________________________ 19
7 Assembly __________________________________________________________________________ 20
7.1 Saw band change _______________________________________________________________________ 20
7.1.1 Removal of saw band ______________________________________________________________ 20
7.1.2 Installation of saw band _____________________________________________________________ 20
7.2 Saw band guide ________________________________________________________________________ 20
8 Cleaning ___________________________________________________________________________ 22
8.1 Daily cleaning after completion of the slaughtering ______________________________________________ 22
8.1.1 Cleaning the band saw _____________________________________________________________ 22
9 Maintenance and repair _______________________________________________________________ 23
9.1 Maintenance ___________________________________________________________________________ 23
9.1.1 Daily maintenance of the band saw ____________________________________________________ 23
9.1.2 Extended maintenance _____________________________________________________________ 23
9.2 Repair by customer service ________________________________________________________________ 24
9.2.1 Return __________________________________________________________________________ 24
10 Waste disposal – recycling ____________________________________________________________ 25
10.1 Disassembly and disposal _________________________________________________________________ 25