Efco DS 2400 T Workshop Manual

BRUSCHCUTTERS DS 2200 - DS 2400
pag. 25
Workshop manual
6. MUFFLER
Inspect the mufer port for excess deposits.
If the engine has been running dirty you can clean
out the exhaust port with a plastic scraper. Make
sure residue is not scratched against the piston.
Scratch clean or use a ne wire brush.
Check the ame screen and gasket condition for
obstructions or leakage.
4.
5.
6.
7.

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English