Efco DS 2400 T Workshop Manual

BRUSCHCUTTERS DS 2200 - DS 2400
pag. 7
Workshop manual
2. SAFETY
Recognize Safety Information
This is the safety-alert symbol. When you see this
symbol on your machine or in this manual, be
alert to the potential for personal injury. Follow
recommended precautions and safe servicing
practices.
Understand Signal Words
A signal word - DANGER, WARNING, or CAUTION
- is used with the safety-alert symbol. DANGER
identies the most serious hazards.
DANGER or WARNING safety signs are located
near specific hazards. General precautions
are listed on CAUTION safety signs. CAUTION
also calls attention to safety messages in this
manual.
Handle Fluids Safely - Avoid Fires
Be Prepared For Emergencies
When you work around fuel, do not smoke or
work near heaters or other re hazards.
Store ammable uids away from re hazards.
Do not incinerate or puncture pressurized
•
•
containers.
Make sure machine is clean of trash, grease,
and debris.
Do not store oily rags; they can ignite and burn
spontaneously.
Be prepared if a re starts.
Keep a first aid kit and fire extinguisher
handy.
Keep emergency numbers for doctors, ambulance
service, hospital, and re department near your
telephone.
Wear Protective Clothing
Wear close tting clothing and safety equipment
appropriate to the job.
•
•
•
•
•

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English