Efco DS 2400 T Workshop Manual

BRUSCHCUTTERS DS 2200 - DS 2400
pag. 29
Workshop manual
7. IGNITION
The units are tted with an “always on switch”
which returns to the on position after the engine
has stopped
Make sure you replace the components and wires
in the correct order before reassembling the
triggers
Make sure contacts are clean and no oxidation is
present.
14.
15.
16.

Efco DS 2400 T Specifications

General

Brand	Efco
Model	DS 2400 T
Category	Brush Cutter
Language	English