en
30
EXTRA MAINTANANCE ADVISABLE
It is advisable to inspect the machine by
a specialized technician at an authorized
service network at the end of season, if used
intensively, and every two years if with normal
use.
ATTENTION: All maintenance
operations not reported in this
manual must be carried out by an
authorized Service Center.
To ensure steady and regular brush
cutter operation, remember that
parts must only be replaced with
ORIGINAL SPARES.
MAINTENANCE
Any unauthorized changes and/or use of
non-original replacement parts may result
in serious injury or death to the operator
or third parties.
To Next Page
Loading...
