Requirements
The operating system on the PS-17 is Linux.
Ethernet connection requirements
The PS-17 network port supports the standard Ethernet network speeds and cable categories listed in the following
table.
Network speed Cable category
10BaseT Category 3 or later
100BaseTX Category 5 or later (4‑pair/8‑wire, short‑length)
1000BaseT Category 5e or later (4‑pair/8‑wire, short‑length)
The network port supports the following Ethernet cable specifications:
•
Unshielded Twisted Pair (UTP) cable
•
Straight-through cable (patch cable)
Network requirements
When the PS-17 is connected to a network, it behaves as a networked printer. Connecting to a live network allows
the PS-17 to query the network for zones, servers, and server-based queues.
The PS-17 supports TCP/IP and UDP/IP (IPv4 or IPv6), along with multiple other protocols.
Internet access is required in order for the PS-17 to access features such as online help and automatic software
updates.
Supported network protocols
The PS-17 is compatible with multiple network protocols. Client computers that do not have any of the compatible
protocols can send print jobs through a print server that has a supported protocol.
The PS-17 can process concurrent protocols over the same connection. It automatically switches to the correct
protocol and handles connections simultaneously.
Configuration and Setup
Requirements
10
To Next Page
Loading...
Need help?
General
