EFILive AutoCal Customer Quick Start Guide
Connecting AutoCal
Using AutoCal
The following instructions describe the functionality and use of your AutoCal device.
The menu structure and entries are based on the Simple Menu structure as this is the
default and recommend mode for most customers.
Step one:
Hook up the AutoCal to the OBDII port and turn your key to the run position
(engine off).
Scroll through the options until you see this first read option.
R
e
a
d 1
Read the calibration from the first configured controller type.
Typically this will be done to read your stock vehicle
calibration. Your correct ecm should already be loaded in
position#1
To Next Page
Loading...
