To achieve a smooth and comfortable experience, you must ensure that the bike is stable.
During use, if you notice that the bike is unbalanced, you can adjust the Foot Pads (No.3)
located beneath the Front & Rear Stabilizers (No.1 & 12).
To adjust, use the Spanner (No.95) to loosen the Hexagon Nut (No.2) by turning it clockwise.
With the nut loosened, rotate the Foot Pads (No.3) until it sits level with the surface that the
bike is on.
When you have finished adjusting the Foot Pads (No.3), re-tighten the Hexagonal Nut (No.2)
by turning it counter-clockwise using Spanner (No.95). If needed, repeat this process to adjust
the remaining Foot Pads (No.3).
To Next Page
Loading...