Efka AB600A - Page 36

- AB600A /AB611A /AB620A
36 | P a g e
Note: Make sure that the proper seating of the housing is guaranteed.
 Tighten the 4 screws (Torx T20) of the side housing.
 Tighten the fastening screws (Torx T20) of the front cover.
M4x42, 1+0,5 Nm
M4x16, 1+0,5 Nm
M4x10, 1+0,5 Nm
M4x6, 1+0,5 Nm