Need help?Do you have a question about the Efka AB620A5035 and is the answer not in the manual?
General| Brand | Efka |
|---|---|
| Model | AB620A5035 |
| Category | Control Unit |
| Language | English |
Procedures for initial setup and operation.
Configuration options and parameter adjustments.
Explanation of the drive's functions and capabilities.
Visual representations of wiring and electrical connections.
Graphical representation of signal timings and operational sequences.
Essential safety guidelines for operation and handling.
Information on accessing additional instructions and resources online.
Guidelines for compliant use of the drive.
Details on optional accessories to enhance functionality.
Specific adapter cords for connecting to specialized machines.
Procedures for backing up and restoring drive parameters.
Process for setting the drive's reference position.
How to configure the motor's rotational direction.
Installation and usage of Hall sensor and pulse encoder modules.
Setting the ratio between motor and machine shafts for speed accuracy.
Selecting operational modes for thread trimming and other sequences.
Assigning functions to input keys (in1-in7).
Setting the speed for precise positioning operations.
Determining and setting the maximum operational speed.
Configuring the overall maximum speed limit.
Setting various positional parameters for automated sewing.
Configuring the first stitch behavior after powering on.
Setting up the softstart function for gradual acceleration.
Configuration of the sewing foot lifting mechanism.
Setup for backtack and stitch condensing at the start of a seam.
Setup for backtack and stitch condensing at the end of a seam.
Configuring ornamental backtack and stitch condensing.
Configuring end ornamental backtack and stitch condensing.
Setup for intermediate backtack operations.
Managing the stitch regulator function for backtack operations.
Adjusting the holding power of the stitch regulator solenoid.
Configuration for reverse motor rotation after trimming.
Procedures for unlocking the chain in specific operating modes.
Configuring the machine run blockage safety function.
Setup for high lift walking foot functionality.
Setting speed limits based on high lift conditions.
Configuring speed limitation n9.
Settings for thread trimming and wiper functions.
Specific functions for bag sewing machine operations.
Configuration of overlock machine functions.
Setup for tape cutter and fast scissors functions.
Manual operation of tape cutter and fast scissors.
Configuration of flip-flop functions for output control.
Setup and operation of seam stitch counting.
Operation modes for free seams and light barrier controlled seams.
Configuration and functions of the light barrier sensor.
Assigning functions to various input terminals.
Configuring software debouncing for input signals.
Assigning functions to F1 and F2 keys on control panels.
Configuring special functions for single and full stitches via pedal.
Configuration of the machine running status signal.
Configuration of signal output for position 1.
Configuration of signal output for position 2.
Configuration of signal output for rotational impulses.
Configuration and functions of actuators.
Performing signal tests on control panels and the drive.
Identification and description of front-side operating elements.
Identification and description of rear-side connectors.
Schematics illustrating input and output connections.
To Next Page
