- AB620A5035
CONTENTS Page
1 Range of Applications 6
1.1 Use in Accordance with Regulations 6
2 Scope of Supply 7
2.1 Special Accessories 7
2.1.1 Adapter Cords for Special Machines 8
3 Putting into Service 8
4 Setting and Putting into Service with the Aid of the Fast Installation Routine (SIR) 9
5 Quick access 13
5.1 Parameter back up 13
5.1.1 Parameter backup 13
5.1.2 Restoring parameters from the backup 13
5.1.3 Save the parameter backup on a USB stick 14
5.1.4 Restoring the parameter backup from the USB stick 15
5.2 Setting the reference position 16
6 Setting the Basic Functions 17
6.1 Direction of motor rotation 17
6.2 Use of a HSM001 Hall Sensor Module or IPG... Pulse Encoder 17
6.3 Transmission Ratio 18
6.4 Selection of Functional Sequences (Thread Trimming Operations) 18
6.5 Functions of the Keys Inputs in1...in7 18
6.6 Positioning speed 18
6.7 Maximum Speed Compatible with the Sewing Machine 19
6.8 Maximum speed 19
6.9 Positions 19
6.9.1 Setting the reference position (Parameter 170) 20
6.9.2 Setting the Positions 21
6.10 Display of the Signal and Stop Positions 21
6.11 Positioning shift 22
6.12 Braking Characteristics 22
6.13 Braking Power at Standstill 22
6.14 Starting Characteristics 23
6.15 Actual Speed Display 23
6.16 Operating hours counter 23
6.16.1 Set and Reset Operating Hours Counter 25
6.16.2 Total Operating Hours Display 25
7 Functions with or without Control Panel 25
7.1 First Stitch after Power On 25
7.2 Softstart 25
7.2.1 Softstart speed 25
7.2.2 Softstart stitches 26
7.3 Sewing foot lifting 26
7.4 Start Backtack/Start Stitch Condensing 27
7.4.1 Speed n3 at the Start of the Seam 27
7.4.2 Stitch Counting for Start Backtack/Start Stitch Condensing 28
7.4.3 Stitch Correction and Speed Release 28
7.4.4 Double start backtack 28
To Next Page
Loading...
