- AB620A5035 Instruction Manual
9 Table of Machine Functions and Adapter Cords
ATTENTION
Before switching functional sequences, detach cables from the inputs and outputs! It must be
absolutely certain that for the functional sequence to be changed the machine provided has
been installed! Then proceed with the setting using parameter 290!
Setting the functional sequence using parameter 290
Brother (737-113, 737-913)
Aisin (AD3XX, AD158, 3310; EK1)
Pfaff (563, 953, 1050, 1180)
Lockstitch: e. g. Dürkopp Adler (467)
Chainstitch: parallel sequence
Pegasus (W500/UT, W600/UT/MS with or
without stitch condensing)
Chainstitch: tape cutter/fast scissors
Juki (5550-7, 8500-7, 8700-7)
With short trimmer Adapter for position sensors
incorporated in the handwheel
Lockstitch: JUKI (LU2210 / LU2260)
Heavy duty bag machine Union
Special
Lockstitch: : e. g.
HonYu class HY-4410
Lockstitch: : e. g.
Juki (LU2810-6)
Chainstitch with UTQ: e. g. Yamato
Strobel: Replacement for ST220
Lockstitch: e. g.Typical Kl. TW1-591
Lockstitch: e. g. Juki PLC 2760
Lockstitch: e. g.DA class 768
Lockstitch: e. g.Typical class 1245
Lockstitch: e. g.Kaiser class 570/590
Lockstitch: e. g.
Typical/Mauser class 335
Lockstitch: e. g.Juki DNU 1541-7
Kettenstich: e. g. Sagitta
*) The signal issued at this output is inverted!