Efka AB600A5010 User Manual

- AB600A5010
FRANKL & KIRCHNER EFKA OF AMERICA INC. EFKA SINGAPORE PTE. LTD
GMBH & CO KG .
CONTROL AB600A5010
Operating manual
With parameter list
- Putting into Service
- Settings
- Functional Description
- Connection Diagrams
- Timing Diagrams
No. 402447 English

Efka AB600A5010 Specifications

General

Brand	Efka
Model	AB600A5010
Category	Control Unit
Language	English

Summary

Putting into Service

Fast Installation Routine (SIR)

Quick Access Functions

Local Parameter Backup and Restore

Procedures for saving and restoring drive settings locally.

Save Parameter Backup to USB Stick

Restore Parameter Backup from USB Stick

Setting the Reference Position

Basic Functions Configuration

Motor Rotation Direction

Setting the motor's rotational direction (clockwise/counterclockwise).

Transmission Ratio Setup

Inputting the ratio between motor and machine shafts for accurate speed.

Functional Sequence Selection

Choosing operational modes for different machine types and functions.

Positioning Speed Adjustment

Setting the speed for precise needle positioning.

Sewing Machine Speed Limits

Adjusting maximum speed based on machine capabilities.

Overall Maximum Speed Setting

Setting the overall maximum operational speed.

Needle Position Configuration

Configuration of needle positions for automated sewing operations.

Setting Reference Position (Parameter 170)

Detailed procedure for setting the reference position using parameter 170.

Defining Sewing Positions

Explanation of position parameters for start and end angles.

Positioning Shift Adjustment

Braking Characteristics Configuration

Braking Power at Standstill

Starting Characteristics Setup

Sewing Foot Lifting Control

Reverse Motor Rotation Setup

Unlocking the Chain (Modes 5/6/7)

Thread Trimming Operations

Overlock Machine Functions (Mode 7)

Tape Cutter and Fast Scissors

Seam with Stitch Counting

Free Seam and Light Barrier Operation

Light Barrier Functionality

Automatic Start Controlled by Light Barrier

Enabling automatic sewing start based on light barrier detection.

Input Function Switching (in1...i13)

Special Pedal Functions: Single/Full Stitch

Signal Testing

Operating Elements and Socket Connectors

Connection Diagrams

Sensor Module and Encoder Connections

Actuator and Frequency Run Connections

Timing Diagrams

Mode 0: Lockstitch Timing

Mode 5: Chainstitch Timing

Modes 5, 6, 7: Unlocking Chain with Light Barrier

Modes 5, 6, 7: Unlocking the Chain

Mode 6: Chainstitch with Fast Scissors

Mode 7: Overlock (Tape Cutter / Seam End Stop)

Mode 7: Overlock (Fast Scissors / Seam End Stop)

Mode 7: Overlock (Tape Cutter / Seam End No Stop)

Mode 7: Overlock (Permanent Chain Suction)

Mode 7: Overlock (Chain Suction via Stitch Count)

Mode 7: Overlock (Chain Suction via Light Barrier)

Mode 7: Overlock (Interrupted Chain Suction)

Parameter List

Operator Level Parameters

Parameters accessible and adjustable by the machine operator.

Operator Level Parameters (Continued)

Further operator-level parameters for drive configuration.

Technical Level Parameters (Code No. 1907)

Parameters for technicians, requiring specific knowledge for adjustment.

Technical Level Parameters (Code No. 1907) (Continued)

More technical parameters for detailed system setup.

Supplier Level Parameters (Code No. 3112)

Parameters specific to suppliers or for advanced servicing.

Supplier Level Parameters (Code No. 3112) (Continued)

Final supplier-level parameters for comprehensive system setup.

Error Displays and Troubleshooting