- AB620A5035
9-contact SubminD male connector
9-contact SubminD female connector
Half-shell housing for 9-contact SubminD
37-contact SubminD male connector, complete
Single pins for 37-contact SubminD with strand of 50 mm length
Adapter set direct drives DC1210 & DC1230
Mounting kit for DC1210 on JUKI M067, M069
Mounting kit for DC1210 on JUKI M068
Mounting kit for DC1210 on PEGASUS EX
Mounting kit for DC1210 on PEGASUS M900
Mounting kit for DC1210 on YAMATO AZ, CZ
Mounting kit for DC1230 on PEGASUS chainstitch
Mounting kit for DC1230 on YAMATO VC, VE, VF, VG
2.1.1 Adapter Cords for Special Machines
For interconnection diagrams of the adapter cords, please refer to our web site at www.efka.net/downloads.
AISIN high-speed seamer AD3XX, AD158, 3310 and overlock machine EK1
BROTHER models 737-113, 737-913
BROTHER Lockstitch machines, with 100 Ω selective resistance,
cl. 7xxx, B84xx, 877B, B87xx, 878B (mode 31)
BROTHER chainstitch machines, with 150 Ω selective resistance,
cl. FD3-B257, 25xx, 26xx, 27xx (mode 32)
BROTHER models B721, B722, B724, B737, B748, B772, B774, B778, B842, B845,
B872, B875
Connection of the position sensor incorporated in the hand wheel
DÜRKOPP ADLER models 210 and 270
JUKI high-speed seamer with index -6
JUKI high-speed seamer with index -7
JUKI lockstitch machines
Connection of the position sensor incorporated in the hand wheel
JUKI DNU1541, LU2210, LU1510
KANSAI machines model RX 9803
PEGASUS models W500/UT, W600/UT/MS with or without stitch condensing
PEGASUS backlatch machine
PFAFF models 563, 953, 1050, 1180
SINGER models 211, 212U, 212UTT and 591
TYPICAL models 1245 & 335
UNION SPECIAL lockstitch machine model 63900AMZ (in replacement of US80A)
UNION SPECIAL model 34700 with stitch lock
UNION SPECIAL models 34000 and 36200 (in replacement of US80A)
UNION SPECIAL models CS100 and FS100
YAMATO VC/VG series chainstitch machines + stitch lock
YAMATO backlatch machine ABT3
YAMATO backlatch machine ABT13, ABT17
MITSUBISHI lockstitch machines
Connection of the position sensor incorporated in the hand wheel
3 Putting into Service