Drive your scooter
Safety check before use
When driving your eFOLDi, choose a route with good road conditions.
The eFOLDi is designed to drive on smooth even surfaces. Unevenly
paved roads or paths, potholes and other hazards, will reduce the life
of any scooter and your safety.
Do not drive on steep roads or excessively cambered roads. The amount
of charge remaining in the battery immediately before commencing any
slope upward will be crucial to the climbing ability. Any deviation from
level/horizontal surfaces should not exceed a gradient of 1:10 (6 de-
grees). For any climbing there are many factors that need to be consid-
ered these are: the tyre pressure and condition, the surface condition (if
wet, icy or slippery, and this includes leaf cover and/or other debris, we
advise against driving the slope), batteries charge and the weight of the
user, all of these will aect performance.
Front brake lock lever:
Drive mode: Must be in the forward, locked position to engage motor
(picture – below left).
Freewheel/motor bypass mode: Move lever out and rearwards to dis-
engage front brake lock (picture – below right). This will disable the
brake and enable freewheel/motor bypass mode, which you will still
feel some resistance. If the eFOLDi is switched on there will be a con-
tinual warning sound from the bleeper.
Do NOT disengage brake lever whilst on hills or sloping ground - you will
have to no form of braking avaliable.
Drive Freewheel
Page 17
To Next Page
Loading...
